Data Sheet

XH200

Distribution Power Amplier

Rear Panel

Compact, lightweight 200W + 200W distribution power amp for installed

systems.

• Two-channel high-output power amp can be switched between 70V and 100V line operation (200W x 2 channels into 24W-70V /

48W-100V).

• Designed for installations in which multiple speakers are driven in parallel.

• High-efficiency switching power supply contributes to compact 2U size and 10 kg weight.

• Rear-panel MONITOR/REMOTE connector allows the unit to be controlled or monitored from a remote location.

• dB-calibrated detented attenuators for each channel.

• A comprehensive range of protection circuitry and indicators ensures operational stability and safety under the widest possible range

of conditions.

• Euroblock input connectors and barrier-strip output connectors allow simple, secure input and output connection.

• High pass filters with switchable 40 Hz or 80 Hz roll-off provide an extra margin of system flexibility.

PAGE 1
XH200 Distribution Power Amplifier XH200 Rear Panel Compact, lightweight 200W + 200W distribution power amp for installed systems. • Two-channel high-output power amp can be switched between 70V and 100V line operation (200W x 2 channels into 24W-70V / 48W-100V). • Designed for installations in which multiple speakers are driven in parallel. • High-efficiency switching power supply contributes to compact 2U size and 10 kg weight.
PAGE 2
XH200 GENERAL SPECIFICATIONS Output Power High Impedance 100V Line (RL=50Ω) 200W x 2 70V Line (RL=25Ω) 200W x 2 38dB (100V)/35dB (70V) Voltage Gain Input Sensitivity RL=8Ω +4dBu S/N Ratio 20Hz~20kHz, DIN AUDIO 103dB Power Consumption 1/8 power (4Ω pink noise) 400W Idle 40W Standby 5W THD+N 40Hz~20kHz, 1/2 power, RL=4Ω Less than 0.1% Frequency Response Po=1W, HPF=40Hz, 80Hz~20kHz +0dB, -0.5dB Crosstalk 1kHz, half power, Att.