Owner's Manual

Wireless DCP Owner’s Manual
17
3. Configuration
 3.3.4 Resetting PINs
Reset the PINs for Wireless DCP.
1
 To reset PINs
1. Tap Reset to display the Reset PIN
screen. If, for example, you forget a PIN,
you can use this screen to reset (or
remove) it. Note that both administrator
and staff PINs are reset by this action.
2. Enter the MAC address of the MTX pro-
cessor to connect using the keyboard.
You can check the MAC address from the
MTX Editor.
3. You will be asked to confirm that you wish
to reset the PINs. Tap Yes to do so.