Owner's Manual

Wireless DCP Owner’s Manual
11
3. Configuration
Tap the Wireless DCP app to launch it. The Select Device screen will be displayed.
3.3 Wireless DCP
Device list
MTX processors available for
connection are displayed
here. When you select one,
the Enter PIN screen will be
displayed.
DEMO button
Tap DEMO on this screen to activate
Offline Demo mode. In this mode, you
can try out Wireless DCP functions and
the user interface without performing any
actual operations on the MTX processor.
Manual IP list button
The Manual IP screen will be
displayed. Refer to Section
3.3.5 Manual IP for details.
If you launch Wireless DCP with Auto-connect mode active, the app will automatically reconnect to
the MTX processor it was most recently used with. You can use the Auto-connect switch to modify
this setting. Refer to Section
3.3.3 Entering a PIN for details.