Owner`s manual

If one or more icons already exist in the patch holder, subsequent additions will be placed in
the next unoccupied position to the right. The only exceptions are the Pickup icons, which will
always be placed in the leftmost position. A Filter icon will appear to the right of a Pickup
icon, unless no Pickup icon is selected, in which case the Filter icon will appear in the
leftmost position. Multiple Pickup, Filter, or Resonator icons cannot be selected. If one of
these icons is selected while a previous icon of the same type exists in the patch holder, the
new selection will replace the previous selection. If all six patch holder positions are full, no
more icons can be selected by double-clicking. It is possible, however, to click and drag an
icon on top of an existing icon, this will delete the original icon and replace it with the newly
placed icon.
Also please note that in some combinations, not all of the Modulation FX-1/2, Delay FX,
Reverberation, and Combination effects will be active. Unfortunately, the possible
combinations are too numerous to describe here. Effect priority is from right to left in the
patch holder. In other words the rightmost effect icon has the highest priority, etc.
To remove a patch icon from the patch holder chain, simply click and drag it to the trash can
icon. If you want to remove all patch icons and start from scratch, click on the "Clear" button.
Please note that when "Clear" is executed the other "Edit" page parameters — "Envelope",
"Control" and "Tweak", to be described later — are also cleared.

The various patches are described briefly below.
<1> Pickup
Changing pickups is like changing pickups on a guitar or changing the position of a pickup on a
brass or woodwind instrument. The VL Visual Editor provides 8 pickup types.
• Single
A simulation of a "single-coil" electric guitar pickup.
- 9 -