Owner`s manual

If the "Patch Palette" or "Voice List" window (described later) is open and you want to access
the "Edit" window, select the "Edit" item from the "Window" menu to open the "Edit" window or
bring it to the front.
The labelled "menu tabs" in the lower section of the "Edit" window provide access to
corresponding edit pages. Before describing these pages let's take a look at the "Patch
Palette".
(a) The Patch Palette
When the "Edit" window is selected, a smaller floating window labelled "Pickup" will appear
to its left. This is the "Patch Palette".
When open the "Patch" window will always appear in front of any other open windows, but,
like any other window, it can be closed by clicking on its close button. Once closed it can be
re-opened by selecting "Show Mdf/Fx Palette" from the "Window" menu.
Click on the left and right facing arrows at the top of the window to switch menus as
required. The following 8 menus are available:
Pickup / Filter / Resonator / Modulation FX-1
Modulation FX-2 / Delay FX / Reverberation / Combination
Double-clicking on any of the items in the "Patch" window called "Patch Palette" causes that
item to appear in the "Edit" window patch holder, and the corresponding effect will be applied
to the current voice. The items in the "Patch Palette" menu items can also be moved to the
patch holder by clicking and dragging.
- 8 -