Owner`s manual

NOTE
• In some cases you might want to change the DRIVER, PIPE/STRINGS and/or VARIATION
settings without affecting the "Edit" page settings. If you switch from the "Edit" window to
the "Synthesis" window to do this, and then return to the "Edit" window, the patch settings
will be retained but the "Envelope", "Controller", and "Tweak" settings will be initialized. If
you want to start again from scratch all patch settings can also be cleared by clicking the
"Clear" button.
7. Voice List
A Voice List window is automatically created the first time the "Edit" window is selected,
and it can be opened by selecting "Voice List" from the "Window" menu. A newly created voice
is automatically added to the Voice List each time the "Edit ->" button in the "Synthesis"
window is clicked.
(a) Audition
When a voice name in the Voice List is clicked, the data for that voice is transmitted to the
connected VL instrument, and the selected voice can be played via the VL instrument. Voice
data transmitted to the VL instrument can be stored to the instrument's memory as required —
refer to the VL owner's manual for details.
(b) Edit
Commands in the "Edit" window can be used to edit Voice List items as in all standard
Macintosh applications. Copied voices can be pasted to a new location, or selected voices can
be cleared as required.
A "block" including multiple items can be copied, pasted, or cleared. If a selected paste area
is smaller than the number of items copied, however, only the number of items that will fit in
- 14 -