User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Audio Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Multi-point connection unavailable
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earbud
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy
- Using only one of the earbuds
- Initializing (performing a factory reset)
- Updating the firmware
- List of support centers
- Appendix
4 Activate Bluetooth on the second Bluetooth device you want to connect. When
Yamaha TW-E3C is displayed, select it to connect.
Yamaha TW-E3C
If successfully connected, you will hear the “Connected” audio message in the earbud. Once
connected, the indicators light up as shown below.
Now you’ve connected to the second device.
Earbud that is now primary
Lights up for 10 sec
26
Bluetooth® Connectivity > Connecting to two Bluetooth devices at the same time (multi-point connection)