User Manual

Table Of Contents

4 Select this product from the list on your Bluetooth device.

Select the listing that reads “Yamaha...” and not the listing that reads “LE-Yamaha...”.

Yamaha TW-E3C

Once connected, the indicator on the primary earbud lights up as shown below. You will hear

the “Connected” audio message in the earbud.

Pairing and connection are now complete.

Earbud that is now primary

Lights up for 10 sec

Earbud (L) and (R) connect automatically and are ready for use.

NOTE

(

Pairing standby mode will automatically end on this product after about two minutes. To pair again or if the connection was

unsuccessful, go back to step 1.

(

If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.

(

One of the earbuds (L or R) will be the primary earbud when connecting, according to their remaining battery power.

(

This product cannot be paired with devices that require a passkey when pairing, as this feature is unsupported.

(

This product supports multi-point connection, which lets you connect to two Bluetooth devices at the same time.