User Guide
Table Of Contents
- Contents
- Notice
- Product Overview
- Charging and Powering
- Connections
- Wearing this product
- Operating this Product
- Settings
- Troubleshooting
- Read this first
- No sound can be heard
- Sound can only be heard from one earphone
- Power will not turn on
- The product cannot be charged
- Cannot connect to a Bluetooth device
- The product does not operate or play back
- The sound is distorted, noisy or choppy
- Restoring this product to factory defaults (Initialize / Reset)
- Problem Still Not Resolved (Customer Support)
- Appendix
3 Once the indicator starts flashing, press the function key on earphone (R) three
times within 10 seconds.
The indicator flashes as shown below, and the power will turn off. You will hear the "Power
Off" audio message in the earphones. If the indicator does not stop flashing red, go back and
retry the previous step.
33
11
22
Purple Flashes
(two times)
Red Lights up
(1 sec)
4 Hold down the function key on earphone (L) for about 10 seconds.
and the indicator flashes as shown below.
10 sec
Purple
Flashes
47
Troubleshooting > Restoring this product to factory defaults (Initialize / Reset)