Owner`s manual

7 En
English
For details on compatible iPod models, refer to “SPECIFICATIONS” (☞ P. 26).
For details on how to operate the remote control, refer to “Remote control” (☞ P. 5).
y
This unit automatically turns off the system if the iPod is not connected and no operation is performed for 60
minutes.
ADJUSTING THE CLOCK
1 Set CLOCK to SET.
2 Set the time.
Press – / + to set the hour and then
press ENTER.
Set the minutes in the same way.
y
• While setting the clock, press RETURN
to return to the previous setting.
•Press SNOOZE/SLEEP on the front
panel to switch between the 12 and 24
hour clock display.
3 Set CLOCK to ON to complete.
At the time ON is set, it will be 0
second and time count starts.
y
• The time is displayed for a certain period
when you press CLOCK on the remote
control.
• You can switch the system to power save
mode by setting CLOCK on the rear panel to
OFF.
The time settings are lost about 5 minutes after
unplugging the unit.
LISTENING TO iPod
1 Set your iPod in the iPod dock.
2 Set SOURCE to iPod.
3 Play the iPod.
Playback operations are available with the
remote control, iPod and this unit.
y
• You can remove the iPod whenever you want.
• When music in the iPod is played back, this unit turns
the system on automatically and plays back the iPod
even if the unit is system off.
1 2
Rear panel Front panel
PRESET
ENTER
3
Rear panel
Note
SOURCE
1 2