User Manual
Cubase AI Instruction Guide for THR-II8
13.
Cubase AIPlay the guitar and check that the input channel level meter, on
the Transport panel located on the bottom of the Cubase AI screen, reacts*.
* Check that the top of the input channel level meter is not displayed in red. If it is displayed in red, return
to Step 12 and lower the volume.
14.
Click the [Record] () button*.
* Turn [Metronome] on or off and perform tempo settings (double-click and then directly enter values) as
necessary.
When recording is finished, click the [Stop] () button. A waveform is displayed.
Once you see the waveform, click the [Play] () button and check that you can hear
the recorded sound from the THR-II.
Tempo
Metronome
Input channel
level meter
© 2020 Yamaha Corporation
Published 10/2020
2020 年 10 月发行
PO-A0