User Manual

22
SH2 Owner’s Manual
 Operations during playback
Playback continues even when you change the mode during playing the Song. Only when the instrument is in
the SONG mode, the following operations are available.
•Pause
During playback, press Button 3 [R/K] (Play/Pause) to pause playback. The display will also pause and the
[R/K] (Play/Pause) lamp flashes will flash. Pressing the button again resumes Song playback from the
current position.
•Stop
During playback, press Button 1 [Select] to stop playback. When the end of the current Song is reached,
playback stops automatically.
When the Song is played back next time by pressing Button 3 [R/K] (Play/Pause), it starts from the
beginning.
• Rewind/Fast forward
During playback or pausing, rotate the [VOICE/VALUE] control. Rotate the control to the left to rewind,
rotate it to the right to fast forward.
MIDI Songs are moved one measure back or forward, while Audio Songs are moved one second.
NOTE
Rewind and fast forward operations are not available for Demo Songs.
• Returning to the Song Top
During playback, press the [VOICE/VALUE] control to jump to the top of the Song.
NOTE
During playback of a Demo Song, this operation selects the Demo Song “d.01.”
5
Press Button 3 [R/K] (Play/Pause) to start playback.
The [R/K] (Play/Pause) lamp lights up and the current position (measure number or elapsed time) will
appear in the display.
The dot at the lower right of the display will flash at the MIDI Song tempo (or the metronome tempo
when playing back an Audio Song).
For operations during playback, see the next section.
NOTE
The current position is not displayed when playing back Demo Songs.
MIDI Song Audio Song
Current measure
number
Elapsed time
sec.
min. (In case of
10 minutes or more,
only the lowest digit
is shown).
Button 1 [Select] Button 3 [R/K] (Play/Pause)
[VOICE/VALUE] control