User Manual

Keyboard operation Description and notes
→ Move right one character
← Move left one character
Press Esc, then F
Move right one word (move to the character following the
end of the word at the cursor location)
Press Esc, then B
Move left one word (move to the first character of the word
at the cursor location)
Ctrl + A Move to the beginning of the line
Ctrl + E Move to the end of the line
• Deleting an input character
Keyboard operation Description and notes
Backspace
Delete the character at the left of the cursor
Ctrl + H
Ctrl + D
Delete the character at the cursor.
If this operation is performed when the command line is
empty, the result is the same as the exit command.
Press Esc, then D
Delete from the cursor position until immediately before the
first space
Ctrl + K Delete from the cursor position until the end of the line
Ctrl + U Delete all characters that are being entered
• Other
Keyboard operation Description and notes
Ctrl + T
Exchange the character at the cursor position with the
preceding character.
If the cursor is at the end of the line, exchange the preceding
character with the character that precedes it.
Ctrl + C
In unprivileged EXEC mode and priviledged EXEC mode,
discard the command being entered and move to the next
line.
In individual configuration mode, discard the command line
being entered and move to priviledged EXEC mode.
Command processing that is currently being executed will
be stopped. (ex: ping command)
Ctrl + Z
Move from individual configuration mode to priviledged
EXEC mode.
This is the same operation as the end command.
2.5.2 Command help
By entering '?' in the command line you can search for the available commands or parameters.
SWP2#show vlan ?
<1-4094> VLAN id
access-map Show VLAN Access Map
brief VLAN information for all bridges (static and dynamic)
filter Show VLAN Access Map Filter
private-vlan private-vlan information
SWP2#show vlan
20 | Command Reference | How to use the commands