User Manual

SWP1 Owner’s Manual
6
NOTICE
To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices
below.
Handling and maintenance
• Do not use the device in the vicinity of a TV, radio, stereo
eq
uipment, mobile phone, or other electric devices
.
Othe
rwise, the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration,
or
ext
reme cold or heat (such as in direct sunlight, near a heater,
or in a car during the day), in order to prevent the possibility of
panel disfiguration, unstable operation, or damage to th
e
in
ternal components.
• Do not place vinyl, plastic or rubber objects on the device,
since this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not
use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drasti
c
cha
nges in ambient temperature—when the device is moved
from one location to another, or air conditioning is turned on
or
of
f, for example. Using the device while condensation
is
pr
esent can cause damage. If there is reason to believe that
condensation might have occurred, leave the device fo
r
seve
ral hours without turning on the power until t
he
con
densation has completely dried out.
• When you are not using the device for a long time, make sure
you unplug the power cord from the wall AC outlet.
Information
About copyrights
• Copying of the software or reproduction of this manual in
whol
e or in part by any means is expressly forbidden withou
t
th
e written consent of the manufacturer.
About functions/data bundled with the device
• This is a class A product. In a domestic environment this
product may cause radio interference in which case the user
may be required to take adequate measures. (CISPR22)
• This product is a class 1 laser product. It is compliant wi
th
IE
C60825-1, IEC60825-2, FDA 21 CFR 1002.10, and 1002.12.
• Ensure all the communication cables are kept apart from the
power cable, etc. Failure to observe this could result in a larg
e
amou
nt of voltage being generated and a subsequent
malfunction.
• Ensure to initialize the settings before transferring/disposing of
the product.
• Installation of the device must comply with local and national
electrical codes.
About this manual
• The illustrations as shown in this manual are for instructional
pu
rposes only.
• Yamaha Corporation make no representations or warrantie
s
wit
h regard to the use of the software and documentation an
d
can
not be held responsible for the results of the use of th
is
manu
al and the software.
• Windows is a registered trademark of Microsoft
®
Corporation
in
the United States and other countries.
• The company names and product names in this manual are
the trademarks or registered trademarks of their respectiv
e
comp
anies.
• Software may be revised and updated without prior notice.
Open Source Software Used in this Product
• Please refer to Yamaha Pro Audio website for the details of
licensing article.
http://www.yamahaproaudio.com/
(weee_eu_en_01)
(rear_en_01)
Information for Users on Collection and
Disposal of Old Equipment
This symbol on the products, packaging, and/
or accompanying documents means that used
electrical and electronic products should not
be mixed with general household waste.
For proper treatment, recovery and recycling of
old products, please take them to applicable
collection points, in accordance with your national
legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to
save valuable resources and prevent any potential negative
effects on human health and the environment which could
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old
products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased
the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside
the European Union]
This symbol is only valid in the European Union. If you wish
to discard these items, please contact your local authorities
or dealer and ask for the correct method of disposal.
The model number, serial number, power requirements, etc.,
may be found on or near the name plate, which is at the top of
the unit. You should note this serial number in the space
provided below and retain this manual as a permanent record of
your purchase to aid identification in the event of theft.
Model No.
Serial No.