User Manual

*2 Shows the transmission information when tail dropping is enabled, and the information only for reception when tail dropping
is disabled.
[Example]
Show the frame counter of LAN port #1.
SWP1#show frame-counter ge1
Interface ge1 Ethernet MAC counters:
Received:
Packets : 84
Octets : 6721
Broadcast packets : 8
Multicast packets : 76
Unicast packets : 0
Undersize packets : 0
Oversize packets : 0
Fragments : 0
Jabbers : 0
FCS errors : 0
RX errors : 0
Transmitted:
Packets : 91
Octets : 11193
Broadcast packets : 0
Multicast packets : 91
Unicast packets : 0
TX errors : 0
Collisions : 0
Drop packets : 0
Received and Transmitted:
64octet packets : 1
65-127octet packets : 166
128-255octet packets : 7
256-511octet packets : 1
512-1023octet packets : 0
1024-MAXoctet packets : 0
10.1.14 Clear frame counters
[Syntax]
clear counters ifname
[Parameter]
ifname : Interface name of LAN/SFP port or logical interface
Applicable interface
[Input mode]
priviledged EXEC mode
[Description]
Clears frame counter information for the interface specified by ifname.
If logical interface is specified as the ifname, the frame counters of all LAN/SFP port units associated with that interface are
cleared.
[Example]
Clear the frame counters of LAN port #1.
SWP1#clear counters ge1
10.1.15 Show SFP module status
[Syntax]
show ddm status
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the status of the SFP module.
Command Reference | LAN/SFP port control | 95