User Manual

S* 0.0.0.0/0 [1/0] via 192.168.100.1, vlan0.1
S 172.16.0.0/16 [1/0] via 192.168.200.240, vlan0.100
S 192.168.1.1/32 [1/0] is directly connected, vlan0.100
C 192.168.100.0/24 is directly connected, vlan0.1
C 192.168.200.0/24 is directly connected, vlan0.100
Show the route used for sending packets that are addressed to 192.168.100.10.
SWP1>show ip route 192.168.100.10
Routing entry for 192.168.100.0/24
Known via "connected", distance 0, metric 0, best
* is directly connected, vlan0.1
6.2.3 Show IP Routing Information Base
[Syntax]
show ip route database
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the IP Routing Information Base (RIB).
[Example]
Show the IP routing information base.
SWP1>show ip route database
Codes: C - connected, S - static
> - selected route, * - FIB route
S *> 0.0.0.0/0 [1/0] via 192.168.100.1, vlan0.1
S *> 172.16.0.0/16 [1/0] via 192.168.200.240, vlan0.100
S *> 192.168.1.1/32 [1/0] is directly connected, vlan0.100
C *> 192.168.100.0/24 is directly connected, vlan0.1
C *> 192.168.200.0/24 is directly connected, vlan0.100
Gateway of last resort is not set
6.2.4 Show summary of the route entries registered in the IP Routing Information Base
[Syntax]
show ip route summary
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows a summary of the route entries that are registered in the IP Routing Information Base (RIB).
[Example]
Show a summary of the route entries that are registered in the IP Routing Information Base.
SWP1>show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 1
Route Source Networks
connected 2
static 3
Total 5
6.3 ARP
6.3.1 Show ARP table
[Syntax]
show arp
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
62 | Command Reference | IPv4