User Manual

[Example]
Set the default LED mode to ECO mode.
SWP1(config)#led-mode default eco
4.10.5 Show LED mode
[Syntax]
show led-mode
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the LED mode setting and status.
The following items are shown.
• Default LED mode setting
•
Current LED mode status
[Example]
Show the LED mode setting and status.
SWP1>show led-mode
default mode : eco
current mode : link-act
4.10.6 Show dip switches status
[Syntax]
show dipsw
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Show the status of the DIP switches at startup and the current status.
[Example]
Show the status of the DIP switches.
SWP1>show dipsw
DIPSW SW1 SW2 SW3 SW4
--------------------------------------
Startup status : ON OFF OFF ON
Current status : ON OFF OFF ON
54 | Command Reference | Maintenance and operation functions