User Manual

If this is executed with the "no" syntax, revision-down is not allowed.
[Example]
Allow revision-down.
SWP1(config)#firmware-update revision-down enable
SWP1(config)#
4.9.5 Show firmware update function settings
[Syntax]
show firmware-update
[Input mode]
priviledged EXEC mode
[Description]
Shows the current settings of the firmware update function.
The following items are shown.
• Download source URL
•
Download timeout duration
• Allow revision-down
[Example]
Show the current settings of the firmware update function.
SWP1#show firmware-update
url:http://www.rtpro.yamaha.co.jp/firmware/revision-up/swp1.bin
timeout:300 (seconds)
revision-down:disable
SWP1#
4.10 General maintenance and operation functions
4.10.1 Set host name
[Syntax]
hostname hostname
no hostname
[
hostname]
[Parameter]
hostname : Single-byte alphanumeric characters and single-byte symbols (63 characters or less)
Host name
[Initial value]
hostname SWP1
[Input mode]
global configuration mode
[Description]
Specifies the host name.
The host name specified by this command is used as the command prompt. If SNMP access is possible, this is used as the value
of the MIB variable sysName.
If this command is executed with the "no" syntax, the setting returns to the default value.
[Example]
Set the host name as "yamaha."
SWP1(config)#hostname yamaha
yamaha(config)#
4.10.2 Reload system
[Syntax]
reload
52 | Command Reference |
Maintenance and operation functions