User Manual

4.5.7 Show NTP server time synchronization settings
[Syntax]
show ntpdate
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the settings that are related to time synchronization from an NTP server.
[Example]
Show time synchronization settings. *If the synchronization update interval is one hour
SWP1(config)#show ntpdate
NTP Server : ntp.nict.jp
adjust time : Thu Jan 1 09:00:00 2015 + interval 1 hour
Show time synchronization settings. *If periodic synchronization is not being performed
SWP1(config)#show ntpdate
NTP Server : ntp.nict.jp
adjust time : Thu Jan 1 09:00:00 2015
4.6 Terminal settings
4.6.1 Move to line mode (console terminal)
[Syntax]
line console port
[Parameter]
port : 0
Serial console port number
[Initial value]
line console 0
[Input mode]
global configuration mode
[Description]
Moves to line mode in order to make console terminal settings.
[Note]
To return from line mode to global configuration mode, use the exit command. To return to privileged EXEC mode, use the
end command.
[Example]
Move to line mode in order to make console terminal settings.
SWP1(config)#line console 0
SWP1(config-line)#
4.6.2 Set VTP port and move to line mode (VTY port)
[Syntax]
line vty port1 [port2]
no line vty port1 [port2]
[Parameter]
port1 : <0-7>
VTY port number
40 | Command Reference |
Maintenance and operation functions