User Manual

[Input mode]
priviledged EXEC mode、individual configuration mode
[Description]
Shows the currently-operating settings (running configuration).
If section is not specified, all settings are shown.
[Example]
Show the running configuration.
SWP1#show running-config
!
ip domain-lookup
!
spanning-tree mode mstp
loop-detect enable
mls qos enable
mls qos dscp-queue 0 0
mls qos dscp-queue 1 0
mls qos dscp-queue 2 0
mls qos dscp-queue 3 0
mls qos dscp-queue 4 0
mls qos dscp-queue 5 0
mls qos dscp-queue 6 0
mls qos dscp-queue 7 0
mls qos dscp-queue 8 2
...
!
snmp-server community public ro interface vlan0.1
!
service http-server
http-server interface vlan0.1
!
service telnet-server
telnet-server interface vlan0.1
!
line con 0
line vty 0 7
!
end
SWP1#
4.2.5 Show startup configuration
[Syntax]
show startup-config
[Input mode]
priviledged EXEC mode
[Description]
Shows the startup settings (startup configuration).
[Note]
The startup configuration that is shown is determined by the unit's DIP switch #1 at the time that the unit is started.
[Example]
Show the startup configuration.
SWP1#show startup-config
!
! Last Modified: 00:00:00 UTC Thu Jan 01 1970
!
ip domain-lookup
!
spanning-tree mode mstp
loop-detect enable
32 | Command Reference | Maintenance and operation functions