User Manual

Setting position
VLAN preset type
#2 #3
Down (ON) Up (OFF)
A
Up (OFF) Down (ON) B
Down (ON) Down (ON) C
The setting values that are common between models and presets are shown first, and then the setting values that are specific to
the presets of each model are shown.
• Settings common to all models and presets (system-wide)
Category Setting item Setting value
Terminal settings
Number of VTYs 8
VTY Timeout 600sec
Console Timeout 600sec
Number of lines displayed 24
Password
Login password none
Administrator password none
Password encryption not encrypted
Time management
Time zone UTC (±0)
NTP server ntp.nict.jp
NTP update cycle once per hour
SYSLOG
Debug level log output OFF
Information level log output ON
Error level log output ON
SYSLOG server none
Firmware update
Download URL
http://www.rtpro.yamaha.co.jp/
firmware/revision-up/swp1.bin
Allow revision-down don't allow
Timeout 300 sec
L2 switching
Automatic MAC address learning enabled
Automatic MAC address learning
aging time
300 sec
Spanning tree enabled
Proprietary loop detection enabled
Access control
Telnet server status run
Telnet server access allow only VLAN #1
HTTP server status run
HTTP server access allow only VLAN #1
TFTP server access deny all
Traffic control
QoS enabled
QoS DSCP - transmission queue ID
conversion table
DSCP: 8 → transmission queue: 2
DSCP:46 → transmission queue: 5
DSCP:56 → transmission queue: 7
Other than above → transmission
queue: 0
Command Reference | Configuration | 21