User Manual

Item Description
Special Queue Assignment: Sent From CPU Specify the egress queue of the frames transmitted from the
CPU
Note 1) Not shown if no policy map is applied. For details on class map information, refer to the show class-map command.
Note 2) Shown only for CoS trust mode.
Note 3) Shown only if the trust mode is "port priority."
Note 4) Shown only for DSCP trust mode.
[Note]
In order to execute this command, QoS must be enabled.
[Example]
Show the QoS settings of LAN port #1. (trust mode CoS)
SWP1#show mls qos interface ge1
Port Trust Mode: CoS
Port Default CoS Priority: 0
Egress Traffic Shaping: Rate 30016 Kbps, Burst 1876 KByte
Queue Scheduling:
Queue0 : Weight 1 ( 5.3%)
Queue1 : Weight 1 ( 5.3%)
Queue2 : Weight 2 (10.5%)
Queue3 : Weight 5 (26.3%)
Queue4 : Weight 5 (26.3%)
Queue5 : Weight 5 (26.3%)
Queue6 : SP
Queue7 : SP
Cos (Queue): 0(2), 1(0), 2(1), 3(3), 4(4), 5(5), 6(6), 7(7)
Special Queue Assignment:
Sent From CPU: Queue7
Show the QoS settings of LAN port #1. (trust mode DSCP)
SWP1#show mls qos interface ge1
Port Trust Mode: DSCP
Egress Traffic Shaping: Not Configured
Queue Scheduling:
Queue0 : SP
Queue1 : SP
Queue2 : SP
Queue3 : SP
Queue4 : SP
Queue5 : SP
Queue6 : SP
Queue7 : SP
DSCP (Queue): 0(2), 1(2), 2(2), 3(2), 4(2), 5(2), 6(2), 7(2)
8(0), 9(0), 10(0), 11(0), 12(0), 13(0), 14(0), 15(0)
16(1), 17(1), 18(1), 19(1), 20(1), 21(1), 22(1), 23(1)
24(3), 25(3), 26(3), 27(3), 28(3), 29(3), 30(3), 31(3)
32(4), 33(4), 34(4), 35(4), 36(4), 37(4), 38(4), 39(4)
40(5), 41(5), 42(5), 43(5), 44(5), 45(5), 46(5), 47(5)
48(6), 49(6), 50(6), 51(6), 52(6), 53(6), 54(6), 55(6)
56(7), 57(7), 58(7), 59(7), 60(7), 61(7), 62(7), 63(7)
Special Queue Assignment:
Sent From CPU: Queue7
Command Reference | Traffic control | 183