User Manual

13.1.15 Show generated IPv6 access list
[Syntax]
show ip access-list [ipv6-acl-id]
[Parameter]
ipv6-acl-id : <3000-3699>
ID of IPv6 access list
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
[Description]
Shows the registered IPv6 access list.
If ipv6-acl-id is omitted, all IPv6 access lists are shown.
[Example]
Show a list.
SWP1>show ipv6 access-list
IPv6 access list 3010
permit fe80:db8:2a0:1::/64
deny fe80::/16
13.1.16 Show generated MAC access list
[Syntax]
show mac access-list [mac-acl-id]
[Parameter]
mac-acl-id : <100-199>, <2000-2699>
ID of MAC access list
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
[Description]
Shows the registered MAC access list.
If mac-acl-id is omitted, all MAC access lists are shown.
[Example]
how a list.
SWP1>show mac access-list
MAC access list 101
deny mac 00A0.DE80.0000 0000.0000.FFFF any
deny mac host 00A0.DE80.1111 any
MAC access list 110
deny mac host 0000.1111.2222 any
13.1.17 Show all generated access lists
[Syntax]
show access-list
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
[Description]
Shows all registered access lists
[Example]
Show a list.
SWP1>show access-list
Command Reference | Traffic control | 177