User Manual

• If a V2 report is received, it is discarded
• If V2 is specified
•
If a V1 query is received, it is forwarded as a V1 query
• If a V1 report is received, it is forwarded as a V2 report
[Example]
On VLAN #2, set the MLD version to 1.
SWP1#configure terminal
SWP1(config)#interface vlan0.2
SWP1(config-if)#mld snooping version 1
On VLAN #2, return the MLD version to the default setting.
SWP1#configure terminal
SWP1(config)#interface vlan0.2
SWP1(config-if)#no mld snooping version
12.3.7 Show multicast router connection port information
[Syntax]
show mld snooping mrouter ifname
[Parameter]
ifname : VLAN interface name
Interface to show
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
[Description]
Shows the multicast router connection port information that was dynamically learned or statically set.
[Example]
Show multicast router connection port information for VLAN #2.
SWP1#show mld snooping mrouter vlan0.2
VLAN Interface
2 ge9
2 ge11
12.3.8 Show MLD group membership information
[Syntax]
show mld snooping groups [detail]
show mld snooping groups X:X::X:X [detail]
show mld snooping groups ifname [detail]
[Keyword]
detail : Detailed information
[Parameter]
X:X::X:X : Multicast group address
ifname : VLAN interface name
Interface to show
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
[Description]
Shows MLD group membership information.
[Example]
Show MLD group membership information.
SWP1#show mld snooping groups
MLD Connected Group Membership
164 | Command Reference | IP multicast control