User Manual

802.1X Port-Based Authentication : Enabled
MAC-Based Authentication : Disabled
RADIUS server address :
192.168.100.101 (port:1812)
[Interface information]
Interface ge1 (up)
802.1X Authentication : Auto (configured:auto)
MAC Authentication : Disabled (configured:disable)
Host mode : Single-host
Dynamic VLAN creation : Disabled
Guest VLAN : Disabled
Reauthentication : Disabled
Reauthentication period : 60 sec
MAX request : 2 times
Supplicant timeout : 30 sec
Quiet period : 60 sec
Controlled directions : Both (configured:both)
Protocol version : 2
Authentication status : Authorized
Interface ge4 (down)
802.1X Authentication : Auto (configured:auto)
MAC Authentication : Disabled (configured:disable)
Host mode : Multi-host
Dynamic VLAN creation : Enabled
Guest VLAN : Disabled
Reauthentication : Enabled
Reauthentication period : 120 sec
MAX request : 2 times
Supplicant timeout : 180 sec
Server timeout : 120 sec
Quiet period : 60 sec
Controlled directions : In (configured:in)
Protocol version : 2
Authentication status : Unauthorized
10.3.22 Show RADIUS server setting information
[Syntax]
show radius-server
[Input mode]
priviledged EXEC mode
[Description]
Shows setting information related to the RADIUS server.
Shows setting information (server host, UDP port number for authentication, shared password, wait time for replying to
requests, number of times to resend requests, server usage prevention time) for RADIUS servers registered in the authentication
server list.
[Example]
Show setting information related to the RADIUS server.
SWP1#show radius-server
Server Host : 192.168.100.101
Authentication Port : 1812
Secret Key : abcde
Timeout : 10 sec
Retransmit Count : 5
Deadtime : 0 min
Server Host : 192.168.100.102
Authentication Port : 1645
Secret Key : fghij
Timeout : 5 sec
Retransmit Count : 3
Deadtime : 0 min
10.4 Error detection function
Command Reference | LAN/SFP port control | 117