User Manual

10.2.8 Clear LACP frame counters
[Syntax]
clear lacp [link-id] counters
[Parameter]
link-id : <1-127>
LACP logical interface number
[Input mode]
priviledged EXEC mode
[Description]
Clears the LACP frame counters.
If link-id is omitted, the frame counter of every existing LACP logical interface is cleared.
[Example]
Clear the frame counter for every LACP logical interface.
SWP1#clear lacp counters
10.2.9 Show LACP frame counter
[Syntax]
show lacp-counter [link-id]
[Parameter]
link-id : <1-127>
LACP logical interface number
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Show the LACP frame counter.
If link-id is omitted, the frame counter of every existing LACP logical interface is shown.
The following items are shown for each associated LAN/SFP port.
• LACP frames sent and received
•
Marker protocol frames sent and received
• Error frames sent and received
[Example]
Show the frame counter for every LACP logical interface.
SWP1#show lacp-counter
% Traffic statistics
Port LACPDUs Marker Pckt err
Sent Recv Sent Recv Sent Recv
% Aggregator po1 129
ge25 297 298 0 0 0 0
ge21 306 299 0 0 0 0
ge19 305 298 0 0 0 0
ge17 309 1350 0 0 0 0
ge23 186 186 0 0 0 0
10.2.10 Set load balance function rules
[Syntax]
port-channel load-balance type
no port-channel load-balance
[Parameter]
type : Rules to specify the forwarding destination interface
102 | Command Reference |
LAN/SFP port control