User`s manual

CHAPTER2 DeviceNet Unit

2-5-3 How to check MAC ID and communication speed

MAC ID and communication speed settings made with a DIP switch on the board can be

checked on the HPB. When the DIP switch settings are changed, always check that the

new settings are correct.

1) Press

(SYS) on the initial screen.

2) Press

(next) to switch the function

display and then press

(OPT).

3) Press

(NODE) to display the MAC

ID.

4) The currently set MAC ID is displayed.

5) Press the

ESC

key to return to the screen

of 3).

Likewise, press

(SPD) to display the

communication speed.

6) The currently set communication speed

is displayed.

Press the

ESC

key to return to the previ-

ous screen.

[MENU]

select menu

1EDIT2OPRT3SYS 4MON

[SYS]

select menu

1SAFE2OPT 3UTL 4next

[SYS-OPT]

select menu

1DEV 2NODE3SPD 4next

[SYS-OPT-NODE]

MAC ID = 30

[SYS-OPT]

select menu

1DEV 2NODE3SPD 4next

[SYS-OPT-SPD]

speed = 500K [bps]