Network Board User's Manual
Table Of Contents
- INTRODUCTION
- Contents
- CHAPTER1 Cautions To Ensure Safety
- CHAPTER2 Ethernet Unit
- 2-1 Ethernet unit features
- 2-2 How data is exchanged
- 2-3 How to connect to Ethernet
- 2-4 Making system settings for the controller (server)
- 2-5 Making the PC settings (client)
- 2-6 Checking the connection with “ping”
- 2-7 Using TELNET
- 2-8 TELNET dedicated parameters
- 2-9 TELENET communication commands
- 2-10 Making a connection with TELNET.EXE
- 2-11 Other operating tasks
- 2-12 Message List
- 2-13 Troubleshooting
- 2-14 Specifications
- 2-15 Supplement
38
CHAPTER2 Ethernet Unit
2-15 Supplement
2-15-1 Typical network systems
How a particular user builds up a network system depends on factors such as
the scale of the network.
■ Example 1
In this example, several controllers are operated from one PC using one HUB.
10BASE-T cable
10BASE-T cable
PC
Controller
HUB
PC
Controller 1
Controller 2
Controller 3
IP address
192.168.0.2
192.168.0.3
192.168.0.4
192.168.0.5
Subnet mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Gateway
192.168.0.1
192.168.0.1
192.168.0.1
192.168.0.1
System setup example