Network Board User's Manual
Table Of Contents
- INTRODUCTION
- Contents
- CHAPTER1 Cautions To Ensure Safety
- CHAPTER2 Ethernet Unit
- 2-1 Ethernet unit features
- 2-2 How data is exchanged
- 2-3 How to connect to Ethernet
- 2-4 Making system settings for the controller (server)
- 2-5 Making the PC settings (client)
- 2-6 Checking the connection with “ping”
- 2-7 Using TELNET
- 2-8 TELNET dedicated parameters
- 2-9 TELENET communication commands
- 2-10 Making a connection with TELNET.EXE
- 2-11 Other operating tasks
- 2-12 Message List
- 2-13 Troubleshooting
- 2-14 Specifications
- 2-15 Supplement
28
CHAPTER2 Ethernet Unit
6) An OK message appears on the screen
when the login check ends normally.
From now on, commands and messages
can be exchanged with the robot.
7) When the task or job is complete, enter
the LOGOUT or BYE command to can-
cel the connection with the controller and
press the Enter key.
8) A message appears announcing the con-
nection has been terminated.
Click the “OK” button and the screen re-
turns to that in step 2.
MEMO
MEMO
If you want to simultaneously control several controllers, start up TELNET.EXE as many
times as needed.