User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Setting the frequency characteristics of the sound according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
Showing the type of audio signal and settings for functions
The indicators on the sound bar will show the following information on the type of audio signal and the
settings for functions for three seconds immediately after INFO is pressed.
a b c d
a
Type of audio signal
TV glows white: Dolby Digital
OPTICAL glows white: AAC
TV and OPTICAL off: PCM, analog, or no input signal
b
Whether Dolby Pro Logic II is enabled or disabled
Glows: enabled
Off: disabled
NOTE
Dolby Pro Logic II is enabled automatically when 2-channel stereo signals are played in surround.
c
Whether the Bass Extension function is enabled or disabled
Glows: enabled
Off: disabled
d
Whether the Clear Voice function is enabled or disabled
Glows: enabled
Off: disabled
Muted state
An error occurred
Flashes red
NOTE
(
When the brightness of the indicators is set to “Off”, the indicators glow only during control operations.
(
See the description of each setting for what the indicators will show when the setting is changed.
91
APPENDIX > List of indicator displays