User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Setting the frequency characteristics of the sound according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
What to do if the sound bar and subwoofer are not paired
automatically
Normally, the sound bar and subwoofer are paired automatically, but if they are not properly paired due to a
temporary communications failure, pair them manually.
NOTE
Pairing is the process of having the sound bar and subwoofer recognize one another as devices to connect to.
1 Turn off the sound bar.
2 Press and hold SUBWOOFER (-) on the remote control for at least five seconds.
The sound bar is turned on, and the OPTICAL indicator on the sound bar flashes.
Flashes
3 Within 30 seconds, press and hold PAIRING on the rear of the subwoofer for at least
five seconds.
When the sound bar and subwoofer have been paired successfully, the * indicator glows.
If the * indicator on the subwoofer does not glow after following the procedure above, do the following and
then perform pairing manually again.
(
Move the subwoofer and/or the sound bar so that they are closer to each other.
83
TROUBLESHOOTING > Other actions