User Manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- PART NAMES AND FUNCTIONS
- PREPARATION
- PLAYBACK
- ADDITIONAL FEATURES
- CONFIGURATION
- Enabling/disabling the HDMI Control function
- Enabling/disabling the Auto Power Standby function
- Enabling/disabling the Child Lock function
- Enabling/disabling the Bluetooth Standby function
- Enabling/disabling the Bluetooth function
- Setting the dynamic range compression level
- Setting the frequency characteristics of the sound according to how the sound bar is installed
- Initializing the sound bar
- TROUBLESHOOTING
- Check the following first when any problem occurs
- When a problem occurs: Power or overall functionality
- The power turns off suddenly
- The power cannot be turned on
- No operations can be performed from the sound bar’s controls
- All indicators are off although the power is on (the power appears to be off)
- The sound bar does not function correctly
- The sound bar turns on by itself
- The sound bar cannot be controlled with the remote control
- The sound bar cannot be controlled using the TV’s remote control
- When a problem occurs: Audio
- When a problem occurs: Bluetooth®
- When a problem occurs: App
- Other actions
- APPENDIX
2 Hold down one of the following buttons for at least five seconds.
Compression level Function Button of remote control
Maximum compression
Apply the maximum amount of dynamic
range compression.
Standard compression
Apply an amount of dynamic range
compression well suited for a typical room.
No compression Dynamic range compression is not applied.
The dynamic range compression level setting is changed.
The indicator shows the setting status as follows, and the sound bar is turned on.
Compression level Sound bar’s indicators
Maximum compression
Glows red
Standard compression
Glows white
No compression
Glows white
58
CONFIGURATION > Setting the dynamic range compression level