Owner's Manual

selected region.
Insert [cmd]+[I] Insert the waveform from
the clipboard into the
selected region.
Clear [clear](keypad) Delete the selected
region.
Select All [cmd]+[A] Simultaneously select the
entire length of the
selected channel(s),
from the beginning to
the end of the sound
file.
Trim [cmd]+[T] Delete the first and last
portions of the
waveform, leaving only
the selected region.
View
Go To Top [<-] Display the beginning of
the sound data.
Go To End [->] Display the end of the
sound data.
Go To Selection Top [cmd]+[<-] Display the beginning of
the selected region.
Go To Selection End [cmd]+[->] Display the end of the
selected region.
Go To Loop Top [opt]+[<-] Display the beginning of
the loop region.
Go To Loop End [opt]+[->] Display the end of the
loop region.
Go To Play Location [5] (keypad) Display the playback
start
location.
Vertical Zoom In [shift]+[H] Increase the vertical
display resolution by
one.
Vertical Zoom Out [shift]+[G] Decrease the vertical
display resolution by
one.
Vertical Full Zoom In [ctrl]+[shift]+[H] Maximize the vertical
display resolution.
Vertical Full Zoom Out [ctrl]+[shift]+[G] Minimize the vertical
display resolution.
Horizontal Zoom In [H] Increase the horizontal
display resolution by
one.
- 2 -