Specifications
P a g e | 30
SAM1-3GM and SAM1 MADI Combined User Handbook Version One Issue 1
4.0 Notes
There are no user adjustable assemblies/components within this unit.
This unit requires rear support when rack mounted.
In order to affect status changes of the unit using the rear DIP switch, the unit will require re
powering before the changes take effect.
Output analogue levels are adjustable over the following range:
0dBm = 0.775V into 600 i.e. 1mW power dissipation.
0dBu = 0.775V RMS = PPM 4.
Shipping condition, -18 dB ref 0FS = 0dBu output.
Typical European line up: -18 dBu
Typical American line: -20 dBu