Specifications

P a g e | 19
SAM1-3GM and SAM1 MADI Combined User Handbook Version One Issue 1
2.8 User Presets and Snapshot Management
SAM1 3GM and SAM1 MADI both use internal and external User Preset memories to enhance usability;
there are a total of 18 User Presets stored in local memory which can then be backed up to an external
device via the USB slot.
A User Preset is defined as a Snapshot of a state of operation and includes the following parameters;
Channel Source Selection
Channel Output ‘Send’ Levels
Channel Pan/Balance
Channel Format Selection
Input User Names
Bargraph Configuration (including Scale, Ref, Zero etc.)
GPI Mode
Internal LS Mute Status
External LS Mute Status
User Preset Name
SAM1 holds a total of 18 Internal Memories that can be backed up to a USB memory stick (front
panel port) or SD Card (rear panel slot). Access to the USER PRESET menus is via the front
panel Menu button followed by the Save / Load functions
The Setup menu is shown below with the Save button highlighted
2.8.1 Saving and Naming User Presets
Pressing Save enters the User Save Management screen which enables the user to back up the
current system snapshot to any of 18 preset locations, chosen by clicking and turning the encoder
to select the appropriate number preset and then entering a name of their choice.