Specifications

P a g e | 16
SAM1-3GM and SAM1 MADI Combined User Handbook Version One Issue 1
2.6.4 Configuring the Hot Source List Using Mixer Pair Select
The Hot Source List can also be configured using the Mixer Pair Select menu. Press and hold
the Source button to the left of the left hand display and the Mixer Pair Select menu appears as
shown below.
Individual or multiple sources can be selected by highlighting any or all of the input types the user
wishes to add to the Hot Source List as shown in the example below where SDI1 pairs 5 to 8 have
been added.
The selection will automatically appear on the Hot Source List
2.6.5 Input selection using the Mixer Pair Select Menu
The Mixer Pair Select menu can be used to route single or multiple selections to the bargraph
pairs as an alternative to using the Hot Source Menu. It can also be used to audibly preview any
available source without adding it to the input bargraph screen and to add selections to the Hot
Source List as described elsewhere.
Press and hold the Source button to the left of the left hand display and the Mixer Pair Select
menu appears as shown below.