Specifications

P a g e | 15
SAM1-3GM and SAM1 MADI Combined User Handbook Version One Issue 1
2.6.2 Configuring the Hot Source List
The Hot Source List can be configured from the Hot Source List itself or from the Main Sources
Menu (described later). If the user wishes to change or add an input to a Hot Source button this
can be done by simply highlighting the button using the Scroll / Select encoder and then pushing
and holding the encoder until the following menu Select New Hot Source appears as can be seen
below.
Select the desired source type and pair and then select the Send to Hot List button to add the
choice to the Hot Source List
2.6.3 Deleting from the Hot Source List
Sources can easily be deleted from the Hot Source List if they are no longer required for a
particular configuration. If the ‘Del Src from List’ button is highlighted within the Hot Source List
menu then any inputs selected via the encoder will be deleted from the list.
The Del Source button has two operational states. When highlighted as shown below the selection
of a single unwanted input will delete it from the Hot Source List and the Del Source button will
then become inactive
By pushing and holding the encoder selection on the Del Source button the mode changes to
allow multiple deletions of inputs from the Hot Source List. The example below shows that all of
the default input buttons for SDI2 have been deleted from the Hot Source List using and the list
has automatically concatenated by moving the active sources to the left of the deleted buttons.