User Manual

En 103
Network
IP Address Configures the network parameters (IP address, etc). 111
Network Standby Selects whether or not to turn on this unit by the command from other network devices. 111
MAC Address Filter Sets the MAC address filter to limit access to this unit from other network devices. 111
Multi Zone
Zone2 Set
Vol ume Enables/disables volume adjustments for Zone2 output. 112
Max Volume Sets the Zone2 maximum volume so that sound is not too loud. 112
Initial Volume Sets the Zone2 initial volume for when this unit is turned on. 112
Mono Switches between stereo and monaural for Zone2 output. 112
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 112
Party Mode Set Enables/disables switching to the party mode. 112
Zone Scene Rename Changes the scene names (for Zone2) displayed on the front display or TV screen. 113
Zone Rename Changes the zone names displayed on the front display or TV screen. 113
Function
Auto Power Down Sets the amount of time for auto-standby. 114
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 114
Display Set
Front Panel Display
Dimmer Adjusts the brightness of the front display. 114
Scroll Sets the scrolling manner of the front display. 114
Short Message Selects whether to display short messages on the TV screen when this unit is operated. 115
Wall Paper Selects a wall paper displayed on the TV. 115
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 115
Target Zone Specifies the zone with which the TRIGGER OUT jack functions synchronized. 115
Target Source Specifies the output level of the electronic signal transmitted with each input switching. 115
Manual Switches the output level for electronic signal transmission manually. 115
Memory Guard Prevents accidental changes to the settings. 116
Language Select an on-screen menu language. 116
Menu Item Function Page