manual

En 98
Network
IP Address Configures the network parameters (IP address, etc). 106
Network Standby Selects whether or not to turn on this unit by the command from other network devices. 106
MAC Address Filter Sets the MAC address filter to limit access to this unit from other network devices. 106
Multi Zone
Zone2 Set
Volume Enables/disables volume adjustments for Zone2 output. 107
Max Volume Sets the Zone2 maximum volume so that sound is not too loud. 107
Initial Volume Sets the Zone2 initial volume for when this unit is turned on. 107
Mono Switches between stereo and monaural for Zone2 output. 107
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 107
Party Mode Set Enables/disables switching to the party mode. 107
Zone Scene Rename Changes the scene names (for Zone2) displayed on the front display or TV screen. 107
Zone Rename Changes the zone names displayed on the front display or TV screen. 108
Function
Auto Power Down Sets the amount of time for auto-standby. 108
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 109
Display Set
Front Panel Display
Dimmer Adjusts the brightness of the front display. 109
Scroll Sets the scrolling manner of the front display. 109
Short Message Selects whether to display short messages on the TV screen when this unit is operated. 109
Wall Paper Selects a wall paper displayed on the TV. 109
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 110
Target Zone Specifies the zone with which the TRIGGER OUT jack functions synchronized. 110
Target Source Specifies the output level of the electronic signal transmitted with each input switching. 110
Manual Switches the output level for electronic signal transmission manually. 110
Memory Guard Prevents accidental changes to the settings. 110
Language Select an on-screen menu language. 111
Menu Item Function Page