manual

En 22
■ Connecting front speakers that support bi-amp connections
When using front speakers that support bi-amp connections, connect them to the
FRONT jacks and EXTRA SP jacks.
To enable the bi-amp function, configure the “Power Amp Assign” setting (p.99) in the
“Setup” menu after connecting the power cable to an AC wall outlet.
■ Connecting Zone2 speakers
When using Zone2 speakers, connect them to the EXTRA SP jacks.
To utilize the EXTRA SP jacks for Zone2 speakers, configure the “Power Amp Assign”
setting (p.99) in the “Setup” menu after connecting the power cable to an AC wall
outlet.
• You can also connect Zone2 speakers using an external amplifier (p.77).
Caution
• Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. When not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
SPEAKERS
CENTER FRONTSURROUND BACKSURROUND
BI–AMP
ZONE 2/F.PRESENCE/
R L R R RL L L
SINGLE
EXTRA SP
This unit (rear)
SPEAKERS
CENTER FRONTSURROUND BACKSURROUND
BI–AMP
ZONE 2/F.PRESENCE/
R L R R RL L L
SINGLE
EXTRA SP
This unit (rear)
Main zone
Zone2
1
Speaker connections
2 3 4 5 6 7 8 9