manual

En 114
Turning on/off the remote control sensor
(REMOTE SENSOR)
Turn on/off the remote control sensor on the main unit. While the remote control sensor
is turned off, you cannot control this unit from the remote control.
Settings
Selecting the remote control ID (REMOTE CON AMP)
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
■ Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1
Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
• The registered remote control codes (p.117) are not cleared even if you change the remote control ID.
Changing the frequency step setting (TUNER FRQ STEP)
(Asia and General models only)
Change the frequency step setting of this unit depending on your listening environment.
Settings
Switching the video signal type (TV FORMAT)
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
Canada, Korea and General models: NTSC
Other models: PAL
ON (default) Turns on the remote control sensor.
OFF Turns off the remote control sensor.
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
ON
REMOTESENSOR
SPIMP.-
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
ID1
REMOTECONAMP
SPIMP.-
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps and
AM by 10-kHz steps.
FM50/AM9
(default)
Select this when you want to adjust the FM frequency by 50-kHz steps and
AM by 9-kHz steps.
OUT 1 IN OUT 2
3
ZONE
2
STEREO
SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
FM50/AM9
TUNERFRQSTEP
OUT 1 IN OUT 2
3
ZONE
2
STEREO
SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
PAL
TVFORMAT