User Manual

RM-TT Reference Manual
22
General specifications
Network specifications
Audio specifications
MAIN SPECIFICATIONS
Dimensions W 140.0 mm × D 140.0 mm × H 40.0 mm (excluding protrusions)
Weight 310 g
Power requirements PoE (IEEE802.3af), DC48 V
Maximum power consumption 4.5 W
In operation
Temperature 0 °C – 40 °C
Humidity 30% – 90% (no condensation)
Storage
Temperature −20 °C – 60 °C
Humidity 20% – 90% (no condensation)
Indicators
•Mic
• Status
• Network port
Maximum number of connections to RM-CR 14 (maximum 16 when not using VXL1-16P)
Accessories
• Tabletop mounting adaptor : 1
• Mounting screw : 3
• Spacer : 3
• Installation Manual (this document) : 1
Dante/PoE port
• Dante audio/Dante control
• Remote control
•PoE
• Cable requirements: CAT5e or higher, STP
Frequency response 160 Hz – 16 kHz (−10 dB)
Sampling rate 48 kHz
Bit depth 24-bit
Latency
46 [ms] (with directivity other than toroid)
50 [ms] (with toroid directivity)
Audio input/output (Dante)
1in×2out
• In1 : AEC reference signal
• Out1 : output of beam mix
• Out2 : output of beam mix (simple processed)
Maximum input level of SPL (0 dBFs) 106.8 dB SPL
Self noise 6.3 dBA SPL
SNR (Ref. 94 dB SPL at 1 kHz) 87.7 dBA
Sensitivity −12.8 dBFS/Pa
Dynamic range 100.5 dBA
Signal processing
• Auto voice tracking
• Selectable polar pattern: Cardioid, Hypercardioid, Supercardioid, Omnidirectional,
Bidirectional, Toroid
• AEC, NR, Dereverberation, Auto Mixer, AGC, User PEQ, Output gain
Manual Development Group
© 2020 Yamaha Corporation
Published 02/2022
IP-B0