User Manual

Technical Data Sheet
2 / 6
Boundary Microphone RM-TT
Specifications
General Specifications
Description Boundary Microphone
Colour Black, White
Dimensions (W x D x H) 140 mm x 140 mm x 41.5 mm
Weight 310 g
Power Requirements PoE (IEEE 802.3af)
Maximum Power Consumption 4.5 W
In Operation Temperature 0°C - 40°C
Humidity 30% - 90% (No condensation)
Storage Temperature -20°C - 60°C
Humidity 20% - 90% (No condensation)
Indicator • Mute Indicator (Mute/Unmute)
• Status Indicator (Ring)
• Network Port Indicator
Maximum Device Number with RM-CR 14 (without VXL1-16P, up to 16)
Accessories Installation Manual, Table-top mounting adapter, 3 x Screw for mounting, 3 x Spacer
Network Specifications
Ethernet Dante, Remote Control, Web UI, PoE
Cable Requirements CAT5e or higher (STP)
Audio Specifications
Frequency Response 160 Hz - 16 kHz (-10 dB)
Sampling Rate 48 kHz
Bit Depth 24 bit
Latency (including signal processing) 46 ms (except for toroidal directivity)
50 ms (for toroidal directivity)
Audio I/O Dante 1 in x 2 out
In1=AEC reference signal/Out1=output of beam mix, Out2= output of beam mix (simple processed)
Maximum Input Level of SPL (0 dBFS) 106.8 dB SPL
Self Noise 6.3 dBA SPL
SNR (Ref. 94 dB SPL at 1 kHz) 87.7 dB A
Sensitivity -12.8 dBFS/Pa
Dynamic Range 100.5 dBA
Signal Processing • Auto Voice Tracking
• Selectable Polar Pattern: Cardioid, Hyper Cardioid, Super Cardioid, Omni, Bi-Directional, Troid
• AEC, NR, Dereverberation, Auto Mixer, AGC, User PEQ, Output Gain