User Manual

RUio16-D Owner’s Manual
4
CAUTION
Always follow the basic precautions
listed below to avoid the possibility of
physical injury to you or others. These
precautions include, but are not limited
to, the following:
Location and connection
• Do not place the product in an unstable
position or a location with excessive
vibration, where it might accidentally fall
over and cause injury.
• Keep this product out of reach of children.
This product is not suitable for use in
locations where children are likely to be
present.
• If the product is mounted in a rack, carefully
read the section “Installing in a Rack” on
page 19. Inadequate ventilation can result
in overheating, possibly causing damage to
the product(s), malfunction, or even fire.
• Do not place the product in a location where
it may come into contact with corrosive
gases or salt air. Doing so may result in
malfunction.
• Before moving the product, remove all
connected cables.
Maintenance
• Remove the USB cable from the computer
when cleaning the product.
Handling caution
• Do not rest your weight on the product or
place heavy objects on it.
NOTICE
To avoid the possibility of malfunction/damage
to the product, damage to data, or damage to
other property, follow the notices below.
Handling and maintenance
• Do not connect this product to a public
Wi-Fi and/or Internet service directly. Only
connect this product to the Internet through
a router with strong password protections.
Consult your router manufacturer for
information on optimum security practices.
• Do not use the product in the vicinity of a TV,
radio, or other electric products. Otherwise,
the product, TV, or radio may generate
noise.
• Do not expose the product to excessive
dust or vibration, or extreme cold or heat, in
order to prevent the possibility of panel
disfiguration, unstable operation, or
damage to the internal components.
• Do not install in locations where temperature
changes are severe. Otherwise,
condensation may form on the inside or the
surface of the product, causing it to break.
• If there is reason to believe that
condensation might have occurred, leave
the product for several hours without turning
on the power until the condensation has
completely dried out, in order to prevent
possible damage.
• Do not place vinyl, plastic or rubber objects
on the product, since this might cause
alteration or discoloration of the panel.
• When cleaning the product, use a dry and
soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-
impregnated wiping cloths, since this might
cause alteration or discoloration.
PA-12 1/2