User Manual

RUio16-D Owner’s Manual
14
Before Using This Product
Using with USB Bus Power
1. Move the [POWER SOURCE]
switch on the rear panel to the
left.
2. Connect the included USB cable
to the [USB 2.0] port on the rear
panel.
3. Connect the included USB cable
to the USB type-C port on the
computer.
4. The indicators on the front panel
light when the power is turned
on.
NOTE
• Use a USB type-C to USB type-C cable
when powering this unit via USB bus power.
• There may not be enough power supplied
from the computer, depending on the
computer’s specs or heat produced. This
may cause the RUio16-D to operate
unpredictably. To ensure stable operations,
use a USB power adapter.
Using with a USB Power
Adaptor or USB Mobile
Battery
If the power supplied via bus power is
insufficient, external power may need
to be supplied from a commercially
available USB power adapter or USB
mobile battery.
1. Move the [POWER SOURCE]
switch on the rear panel to the
right.
2. Insert the plug of the USB power
adapter or USB mobile battery
into the [5V DC IN] port on the
rear panel.
3. The indicators on the front panel
light when the power is turned
on.
WARNING
Before turning on the power, be sure to set
the [GAIN] knob to the minimum setting.
Failure to do so may result in hearing loss,
electric shock, or damage to the device.
NOTE
Switching the [POWER SOURCE] switch will
temporarily reset this unit.