User Manual

RUio16-D Owner’s Manual
11
NOTE
• In combination with VST Rack, this offers a
function for detecting any abnormalities that
may have occurred on the computer and
automatically turning the bypass on.
• The unit continuously operates in bypass
mode when not connected to a computer.
) [GAIN] knob
Adjusts the input signal level from the
INPUT jacks.
! [PAD] switch
When this is turned on, the levels of
sound inputted to this unit will be
attenuated. Turn this on if the sound is
distorting or if the [PEAK] indicators
are lighting up.
NOTE
A noise may be heard when you operate this
switch. Set the [GAIN] knob to minimum (0)
before using this switch.
@ [OUTPUT] knob
Adjusts the output signal level from the
[OUTPUT +4dBu] jacks.
# [PHONES] jack
Connect your headphones here. The
jack supports stereo phone plugs.
$ [PHONES] knob
Adjusts the output signal level for the
headphones.
About output
When this unit is starting up and
you press the [BYPASS USB]
switch, the signal from the
computer can be output once the
switch’s light turns off.
The unit is continuously in bypass
mode when not connected to a
computer.