User Manual

[FREQUENCY] Knob
Sets the frequency to be operated by the equalizer and side-chain filter.
[Q] Knob
Sets the Q (sharpness) of the equalizer and side-chain filter.
The more you turn the knob to the right, the band covered by the equalizer and side-chain filter
becomes wider.
[THRESHOLD] Knob
Sets the threshold value at which the processing effect starts to be applied.
[RATIO] Knob
Sets the ratio of boost/cut for the input signal.
Turn the knob to the right to boost, and to the left to cut. The maximum effect is achieved
when the knob is turned completely in either direction.
[ATTACK/RELEASE] Buttons
Selects from three types of attack time/release time when compression or boost is applied.
FAST has a faster attack and faster release, SLOW has a faster attack and slower release, and
AUTO automatically adjusts the attack/release according to the frequency band.
[MODE] Button
Sets whether the side-chain signal works when it exceeds the threshold value (ABOVE) or when
it falls below it (BELOW).
EQ GAIN Meter
Displays the dynamically changing EQ gain.
THRESHOLD Meter
Displays the level of the side-chain signal relative to the threshold level.
Graphical Display
Displays the characteristics of the equalizer.
Usually, you will see a reference EQ graph that displays frequency and effectiveness, and a
dynamic EQ graph that displays the characteristics of dynamically changing EQs.
If SIDECHAIN [LISTEN] is activated, the characteristics of the side-chain filter are displayed.
EQ Plug-ins
VST Rack Pro Plug-in Reference | 75