User Manual

Open Module Settings
Opens the [Module Settings] window. It provides the settings for the selected module.
Channel Selector
Allows you to select which channels are displayed. The available channel configurations depend on the
channel configuration of the track and on the selected module. Mixdown allows you to display the
average value of all channels within the track.

The channel selector is only available for configurations with two or more channels.
NOTE: If side-chain is activated, you can select between [Main] or [Side-Chain]
channels. Combined [Main & Side-Chain] views are also available for some modules.
Reset Module Values
Resets the measured values of the selected module. While holding [Alt/Opt], click to reset all modules
at the same time.

You can also reset the measured values of a module by clicking them while holding
[Ctrl]/[command].
Reset Module Values on Start
If this button is activated, all values are automatically reset when playback is started.
Split Horizontally
Splits the selected module slot horizontally.

This button is not available if a module is maximized.
Split Vertically
Splits the selected module slot vertically.

This button is not available if a module is maximized.
Module Slot Controls
Each module slot shows the following controls in the top right corner if you move the mouse over it:
Remove module slot
Removes the module slot from the current plug-in layout.
Split horizontally
Splits the module slot horizontally.
Analyzer Plug-ins
VST Rack Pro Plug-in Reference | 61