User Manual

Presets

Presets are useful in the following situations:

• To save a complete setup with different impulse responses for later use (for example, different

setups for explosion sounds that can be reused for other scenes or movies).

• When you want to save different parameter sets for the same impulse response so that you can

later choose the set that best suits your needs.

Programs

Programs offer the following advantages:

• Up to 36 programs can be loaded into the program matrix for instant recall.

• A program provides a quick and easy way to save and recall the settings for a single impulse

response, allowing for short loading times.

• When automating a project and loading a REVerence program, only one automation event is

written.

If you load a plug-in preset instead (which contains a lot more settings than a program), a lot of

unnecessary automation data (for the settings that you did not use) is written.

Setting up Programs

Procedure

In the program matrix, click on a program slot to select it.

A blinking white frame indicates that this program slot is selected.

2. Click the [Browse] button or click the empty slot again to load one of the included

programs. You can also import a new impulse response file.

3. In the browser, select the program containing the impulse response that you want to use

and click [OK].

The name of the loaded impulse response is shown in the upper left corner of the

REVerence panel.

4. Set up the REVerence parameters as and click the [Store] button to save the impulse

response with the current settings as a new program.

5. Set up as many programs as you need by following the steps above.



If you want to use your set of programs in other projects, save your settings as a

plug-in preset.