User Manual

Operating requirements of the software

• Tablet device

• Hardware: Apple iPad (4th generation and earlier iPad, and 1st

generation iPad mini)

• OS: iOS 11.0 or later

* For the latest information about devices and OS versions that are

known to work, refer to the following website.

http://www.yamahaproaudio.com/

* This software does not work on iOS devices other than the iPad.

• Remotely controlling a system*

* See “Supported Devices” on the product website below to learn

which devices are supported by ProVisionaire Touch and ProVision-

aire Touch KIOSK.

http://www.yamahaproaudio.com/

• Wi-Fi access point (802.11n/5 GHz is recommended)

• Cat5e cable (for connection between the target system

and the Wi-Fi access point)

 Systems that can be controlled

• For one MTX/MRX system device, up to eight controllers can be

connected, including Wireless DCP or AMX/Crestron units.

 Settings

• Three access control levels can be specified:

Power User, Administrator, and Screen Lock.

• The Monitor Device function can be used to monitor the target

system.

• An iPad can be set up as a dedicated terminal for this applica-

tion (controller).

Tablet device (iPad) with ProVisionaire Touch

or ProVisionaire Touch KIOSK installed

Wireless LAN

connection

Wi-Fi access

point

CAT5e cable

Target system